Main Article Content
Abstract
In bearings faults are one of the main reasons for the problems in rotating machines. In order to reduce the unnecessary cost and the increased security of the workers and machine every industry wants an efficient maintenance technique. Thus, it becomes necessary to diagnose and detect the faults in bearings for the reliable and safe operation. This study is centred around the characterization of bearings on different rpm and faults. A test rig has been taken with two different bearings in two of the three cases and in the third case similar type of bearings at the driven and non-driven end of the test rig. After performing the experiment, comparison has been done on the basis of data received from omnitrend.